Keep Some Spare Cutting Wires On Hand

If you wish to purchase spare wires, they are available on the site for $1.50-$5.00 each, depending on wire type. Also, set of 4 wires for $5.95 for selected wires as shown on the Wires page is an option. Please measure your existing wire and compare your measurement with these below, and indicate what kind of wire you need. If you can identify the type of wire you need from the chart below, please identify the wire you need by its item number. If you are only ordering wires, you will only be charged the price of a first-class stamp for shipping. If you are not sure what kind of wire to order, scroll down to look at additional information about determining the correct wire for your cheese slicer.

Remember, CheeseSlicing, LLC offers a lifetime replacement guarantee on wires for the slicers. Simply send a self-addressed, stamped envelope and the broken wire for a replacement, free of charge. To ensure excellent customer service, please enclose a note describing the manufacturer, if known, type of cheese slicer, dimensions, and type of handle. If you can identify the type of wire you need from the chart below, please identify the wire you need by its item number.

Our Mailing Address
CheeseSlicing, LLC
Customer Service Department

4325 Sommer Drive
Sheboygan, WI 53081

Wire Comparison Chart

Ready to purchase your wires? Add them to the cart here.
Need more information? Scroll down for additional assistance...

More information to help you choose the correct wire

Wires for Prodyne cheese slicers

Most Prodyne cheese slicers have a sticker on the bottom identifying them as a Prodyne product. If your cheese slicer has a black or chrome-painted plastic handle with a patent number on it, it is a Prodyne cheese slicer.

Prodyne cheese slicers use 2 different wire types. MPR-601MW, MPR-602MB, MPR-603MG, WPR-126B, WPR-805B, WPR-BB120, WPR-MW805, WPR-CB50, WPR-CB60 use the CW-LONG wires.

Prodyne cheese slicers use 2 different wire types. MPR-601MW, MPR-602MB, MPR-603MG, WPR-126B, WPR-805B, WPR-BB120, WPR-MW805, WPR-CB50, WPR-CB60 use the CW-LONG wires.

The cheese slicer serving trays, which are round in shape (Models WPR-912B, WPR-912MG), and the Cheese Paddle Cutting Boared WPR-CP200 use the CW-SHORT wires.

Wires for compact marble cheese slicers

Compact Marble Cheese Slicers may be made by Fox Run, RSVP International, or other companies. They typically do not have any idenfying marks on them, except they may say Taiwan on a small sticker. Two features determine this kind of cheese slicer: the wire length (5.5 to 5.75 inches) and the handle mechanism. The handle itself is made of marble, with a threaded stainless steel screw coming out of it. This threaded part screws into a small steel circle that looks like a 'stainless steel donut.' While the color of marble may differ, the shape and metal parts of the handle will look like this:

These cheese slicers need a Compact Spare Wire (single: CW-CMPCT, or set of 4: CSET4-CMPCT4)

Wires with rings on the ends

Some cheese slicers have wires with tiny rings on each end, rather than loops. The handles of these cheese slicers are marble or stainless steel, with an embedded female nut. A stainless steel screw with a place cut out for the wire ring to fit inside screws through a hole in the arm, and into the embedded female area of the marble handle. This assembly looks like this:

If your handle assembly looks like this, and there are rings on the ends of your wires, which wire you need depends on the length of the wire.

If your wire should be 5.0 inches long, you need CW-NP349R
If your wire should be 5.5 inches long, you need CW-GRY5
If your wire should be 6.5 inches long, you need CW-NP6.5R